Direct and precise shifting, smooth activation, options for both rim and disc brakes, and low "ride" weight were fundamental when developing UNO, which merged the most-desirable characteristics of both electronic and mechanical systems to forge a new category of groupset technology. Hydraulic technology had already been implemented in the areas of brake and suspension systems; UNO applied that same technology to actuate shifting.

Rotor Uno Hydraulic Groupset For Rim Brake Specification

• Total weight = 1655 g, which includes shifters, front and rear derailleur, filled, uncut hoses, rim brake calipers and installation hardware, chain and cassette; designed for any ROTOR crank either with/without power meter (crankset is not included)
• 11-28T UNO cassette included.
• 118-link UNO chain included.
• Includes complete bleed kits for both shifting and braking.
• Compatible with standard single bolt, frame/fork brake mount.
• Same mineral oil used for both shifting and braking.
• Compatible with all ROTOR cranksets, oval Q-Rings, and round rings

Rotor Uno Hydraulic Groupset Post Mount Disc Brake Specification

• Total weight = 1655 g, which includes shifters, front and rear derailleur, filled, uncut hoses, postmount calipers,160mm brake rotors, chain and cassette; designed for any ROTOR crank either with/without power meter (crankset is not included).
• 11-28T UNO cassette included.
• 118-link UNO chain included.
• Includes complete bleed/service kits for both shifting and braking.
• Compatible with standard postmount frame/fork, and most standard flatmount frames with adaptors.
• Same mineral oil used for both shifting and braking.
• Compatible with all ROTOR cranksets, oval Q-Rings, and round rings

Rotor Uno Hydraulic Groupset Direct Mount Disc Brake Specification

• Total weight = 1655 g, which includes shifters, front and rear derailleur, filled, uncut hoses, direct mount calipers,160mm brake rotors, chain and cassette; designed for any ROTOR crank either with/without power meter (crankset is not included).
• 11-28T UNO cassette included.
• 118-link UNO chain included.
• Includes complete bleed/service kits for both shifting and braking.
• Compatible with standard direct mount frame/fork, and most standard flatmount frames with adaptors.
• Same mineral oil used for both shifting and braking.
• Compatible with all ROTOR cranksets, oval Q-Rings, and round rings

This mudguard set specifically designed for the Whyte Wessex model to provide protection from road spray. Breakaway safety stays for added safety. Constructed from a PET/Aluminium laminate for durability.

The all new Wessex is conceived to be the ideal British road bike. Developed and specified for riding on all road surfaces, the Wessex uses the very latest in tubeless ready, high air volume Schwalbe tyres on 21mm wide Easton AR rims. Whether you're commuting longer distances, winter training or entering summer sportifs, the Whyte Wessex Disc Road Bike 2017 offers Cyclo Cross durability with pure Road geometry.

Whyte Wessex Disc Road Bike 2017 is exceptionally versatile and capable with 12mm through axles, tubeless tyres, disc brakes and the ability to fit full length mud guards makes the Wessex arguably the most versatile and capable carbon road bike Whyte have ever made.

Whyte Wessex Disc Road Bike 2017 Specification

• Frame: Uni-directional Multi Monocoque with Flat Mount 160 Disc mount, DOX internal cable routing, Verti-Grip integrated seat clamp system, Concealed eyelets for Mud Guards and 142mm rear dropouts with 12mm through axle
• Fork: Straight Bladed Carbon Front Fork, Tapered Alloy Steerer with, 12mm x 100mm through axle, concealed eyelets for Mud Guards
• Headset: FSA No. 42 Integrated Road, 1 1/2" lower and 1 1/8" upper Sealed Cartridge Bearings
• Rear Hub: Alloy, Double Sealed Cartridge Bearing Hub, Centre-lock, 12mm x 142mm Through Axle, 28 Hole
• Front Hub: Alloy, Double Sealed Cartridge Bearing Hub, Centre-lock, 12mm x 100mm Through Axle, 28 Hole
• Spokes: DT Competition butted, Black Sandvik Stainless with Black Brass Nipples
• Rims: Easton AR-21, 21mm wide Tubeless Ready Rims, 28 Hole
• Tyres: Schwalbe S-One, 700 x 32c, TL-Easy Tubeless System, MicroSkin Puncture Protection, Folding
• Shift Levers: Shimano ST-685 Ultegra, 11 Speed
• Front Derailleur: Shimano FD-5800 105, 11 Speed
• Rear Derailleur: Shimano RD-6800 GS Ultegra, 11 Speed
• Cassette: Shimano CS-5800 105 11-32, 11 Speed
• Chain: Shimano, HG-601, 11 Speed
• Crankset: FSA Gossamer Pro EVO-386 DB 34-50, 11 Speed, Compact Double
• Bottom Bracket: FSA EVO-8681
• Seatpost: Whyte 20mm Offset, 27.2mm x 350mm, 1pcs 3d Forged 6061 Alloy, 2 Bolt Clamp
• Seat: Whyte Custom Road, with lightweight foam, Triple Panel Design
• Bar: Whyte Road, 31.8mm, Compact "Wing" Bar
• Stem: Whyte -6 Deg/6 Deg, 100mm 52cm, 110mm 54cm, 120mm 56/58cm
• Grips: Whyte Anti Slip with 3M Reflective logos on tapes
• Front Brakes: Shimano BR-805 Hydraulic, Centre-lock 160mm Rotor
• Rear Brakes: Shimano BR-805 Hydraulic, Centre-lock 160mm Rotor
• Brake Levers: Shimano ST-685 Ultegra
• Pedals: Fibre Reinforced Composite Platform
• Colour: Matt Zinc with Lime/Grey
• Sizes Available: 52,54,56,58

Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance. CNC machined from solid 6061 aluminium to exact tolerances.Stiffer than any original equipment hanger which improves shifting performance. Still breaks before your frame does to perform its main function.

Wheels Manufacting Replaceable Derailleur Hanger Dropout 248

All hangers come with instructions and hardware

Direct replacement for original equipment with guaranteed fit

Black anodised for extra scratch and damage resistance

Laser etched for easy part identification

Wheels Manufacting Replaceable Derailleur Hanger Dropout 248 Compatibility

GT

Attack 1.0

Attack 2.0 - 2014

Grade - 2016

GTR Carbon - 2009

GTR Carbon - 2010

GTR Carbon - 2011

GTR Carbon - 2012

GTR Carbon - 2013

GTR Series - 2012

GTR Series - 2013

GTR Series 2 - 2014

GTR Type CX - 2013

Zaskar - 2013

Designed for road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. A climbing wheel with an aero advantage, designed to be ridden in the mountains.

Enve 3.4 SES Carbon Wheelset 2017 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 is the most versatile Smart ENVE System aero wheel.

Enve 3.4 SES Carbon Wheelset 2017 Specification

• Material: Carbon Fiber
• Rim Depth: 38 / 42
• Rim Width: 21 / 21
• ERD: 580 / 573
• Built Weight: 1477g
• Rim Weight: 432 / 439g
• Recommended Tire Size: 25mm

This new wheel offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of Zipp’s most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable.

Zipp 404 Firecrest Carbon Clincher Disc Rear Wheel 2017 Includes

• Zipp thru-axle end caps
• Zipp Tangente quick release
• Zipp rim tape 700c X 20mm
• Zipp core valve extension per wheel

Zipp 404 Firecrest Carbon Clincher Disc Rear Wheel 2017 Specification

Weight 915g

Hub Used 177D

Rim Depth 58mm

Max Width 26.53mm

Internal Width 16.25mm

Spokes Sapim® CX-Ray®

Spoke Count 24

Spoke Length Non-Drive 260mm

Spoke Pattern Non-Drive 2 cross

Spoke Pattern Drive 2 cross

Spoke Length Drive 258mm

11-speed compatible hub Yes

Track Adaptable No

Dimpled Surface Yes

Nipples Sapim® Aluminum Secure-lock nipples

External Nipples Yes

Thru Axle Compatible Yes

XDR Driver Body Compatible Yes

Max recommended rider weight 250lbs

At the center of the 404 Firecrest Carbon Clincher Disc-brake is the durable and versatile 77 hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools.

Zipp 404 Firecrest Carbon Clincher Disc Front Wheel 2017 Specification

• Weight 800g
• Hub Used 77D
• Rim Depth 58mm
• Max Width 26.53mm
• Internal Width 16.25mm
• Spokes Sapim® CX-Ray®
• Spoke Count 24
• Spoke Pattern 2 cross
• Spoke Length Drive 260mm
• Spoke Length Non-Drive 258mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62bars
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim® Secure Lock
• External Nipples Yes
• Thru Axle Compatible Yes

With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation.

Zipp 404 Firecrest Carbon Clincher Disc Wheelset 2017 allow a wider range of tire selections, such as 28 or 30mm Zipp Tangente R28 and R30 Course and R28 Speed tyres, for increased comfort, handling and rolling resistance.

Zipp 404 Firecrest Carbon Clincher Disc Wheelset 2017 Includes

• Zipp thru-axle end caps
• Zipp Tangente quick release
• Zipp rim tape 700c X 20mm
• Zipp core valve extension per wheel

Zipp 404 Firecrest Carbon Clincher Disc Wheelset 2017 Specification

Front Wheel

Weight 800g

Hub Used 77D

Rim Depth 58mm

Max Width 26.53mm

Internal Width 16.25mm

Spokes Sapim® CX-Ray®

Spoke Count 24

Spoke Pattern 2 cross

Spoke Length Drive 260mm

Spoke Length Non-Drive 258mm

Max Tire Pressure 125psi

Max Tire Pressure 8.62bars

Track Adaptable No

Dimpled Surface Yes

Nipples Sapim® Secure Lock

External Nipples Yes

Thru Axle Compatible Yes

Rear Wheel

Weight 915g

Hub Used 177D

Rim Depth 58mm

Max Width 26.53mm

Internal Width 16.25mm

Spokes Sapim® CX-Ray®

Spoke Count 24

Spoke Length Non-Drive 260mm

Spoke Pattern Non-Drive 2 cross

Spoke Pattern Drive 2 cross

Spoke Length Drive 258mm

11-speed compatible hub Yes

Track Adaptable No

Dimpled Surface Yes

Nipples Sapim® Aluminum Secure-lock nipples

External Nipples Yes

Thru Axle Compatible Yes

XDR Driver Body Compatible Yes

Set Weight 1715g

Max recommended rider weight 250lbs

This stem rounds out the ultimate ENVE cockpit by linking handlebar to fork in order to deliver a ride experience defined by responsive, confidence inspiring control. This ride quality is achieved by tuning the uni-directional carbon fiber laminate and finishing off the stem with cold forged alloy face plate and titanium hardware.

Enve Carbon Road Stem Specification

• Material: Carbon Fiber
• Available Length: 75, 90, 100, 110, 120 and 130 mm
• Weight Range From 107g for size 75mm to 136g for 130mm
• Rise: +/- 6 degrees
• Clamp Diameter: 31.8 mm
• Faceplate Material: Aluminum
• Hardware Material: Titanium
• Stack Height: 41 mm

This Bar is tried and proven in the wind-tunnel as not only a very fast bar, but one that puts your body into a more aerodynamic position. The SES Aero Road Bar also features a unique compact geometry, thoughtful ergonomics, and ENVEs Integrated Bar End Plugs.

Enve SES Aero Road Carbon Handlebar Specification

• Material: Carbon Fiber
• Weight: 40-233g, 42cm-246g, 44-250g
• Width C to C in Drops: 40=40cm, 42=42cm, 44=44cm
• Width C to C in Hoods: 40=35cm, 42=37cm,44=39cm
• Reach: 77 mm
• Drop/Rise: 127mm
• Clamp Diameter: 31.8

Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, each ENVE Road Handlebar features dual cable routing and ENVEs Integrated Bar End Plugs.

Enve Road Compact Carbon Handlebar Specification

• Material: Carbon Fiber
• Weight: 40cm-206g, 42cm-208g, 44 cm-215g
• Width C to C in Drops: 40=42cm, 42=44cm, 44=46cm
• Width C to C in Hoods: 40=40cm, 42=42cm,44=44cm
• Reach: 79 mm
• Drop/Rise: 127mm
• Clamp Diameter: 31.8

The Supertour rack is the new addition to the Tour rack family. Even lighter, it is made from 10mm alloy tubing. Designed to fit either 26” or 700c bikes, this rack is perfect for commuting and touring. The front mounts are positioned lower, enabling it to be easily fitted to small frames as well. Rear mounting plate supports up to 3 rear lights/reflectors.

Tortec Supertour Rear Rack 26-700c Features

• Made from 10mm alloy tubing
• Fits either 26” or 700c bikes
• Rear mounting plate supports up to 3 rear lights/reflectors
• Max load 25kg.
• 5 year warranty

PLEASE NOTE IMAGE IS FOR ILLUSTRATION PURPOSES LIGHT IS NOT INCLUDED

This embodies 10 years of Quarq’s technology advances and adds new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets.

Sram Red DZero Power Meter Crankset Features & Benefits

• Exogram carbon fiber crank arms.
• Bluetooth low energy technology and ANT+ wireless data transfer.
• AxCad – no cadence magnet required.
• 10K Temperature Compensation.
• Battery – CR2032, 200-hour battery life, change without tools.
• Power Balance.
• OmniCal – swap chainrings without affecting accuracy.
• 2-year warranty.
• IPX7 waterproof rating.
• Accuracy – within 1.5%, measuring both legs.
• Free firmware upgrades with the Qalvin app.

Sram Red DZero Power Meter Crankset Essential Details

• Works with SRAM 11-speed drivetrains and the SRAM RED 10-speed drivetrain.
• Available in Hidden Bolt (HB) only.
• Compatible SRAM Chainrings ensure the chain derailment pin aligns with the crank arm.
• BB30 versions ship with the spacers and wave washer required for BB386EVO installation.

Over the past decade the Elite Custom Race has become almost ubiquitous in the World Tour peloton, for several years over 50% of riders in the Tour De France were using them, a level of domination almost unmatched by any manufacturer in modern times.

Elite Custom Race Plus Bottle Cage Features

• Weight: 38 grams
• Painted with Fibre-reinforced (FRP) construction.
• Adjustable elastomer rubber shim.
• The choice of the world’s best Pro Teams.
• Made with pride in Italy

Great value Alivio rear derailleur offering crisp performance on- and off-road for 9-speed drivetrains. Shadow design with smooth skid plate surface features a super low profile design that reduces the risk of damage from trail side hazards.

Shimano Alivio 9 Speed Rear Derailleur Features

• Wide link design increases rigidity and service life
• Alloy body and outer link leads to lower weight without compromising strength and durability
• 11-tooth pulleys for reduced pulley wear and chain noise
• Advanced light action design with low friction fluorine coated link pivot bushings
• For use with 32 to 36 tooth low rear sprockets, total capacity 45 teeth
• Top-normal swing design
• Compatible with 9-speed Hyperglide sprockets

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.

Shimano EW-RS910 Di2 Frame Or Bar Plug Mount Junction A Charging Point is required to connect the shifters via E-tube wires to the down tube junction wire. For either specific frame mount or handlebar end plug mount.

Shimano EW-RS910 Di2 Frame Or Bar Plug Mount Junction A Charging Point Features

• 2-port design
• Battery level indicator feature
• E-tube EW-SD50 wires not included
• Additional charging point when using internal battery
• Gear index setup switch to allow fine tuning via shifter buttons
• Reliable and secure water resistant connectors

Whyte have broken the mould with their kids bikes. By putting 26" wheels on a kids MTB they’ve given a boost in performance similar to an adult switching to a 650b/27.5" Trail Hardtail. More confidence, more control and easier riding.

The 403 uses a REVO Shift so small hands can easily exploit the huge range of gears 11-40T.

Whyte 403 MTB 2017 also comes with Whyte's own Get-a-Grip seat post clamping system. This easy to use clamp allows the post to be raised or lowered on the trail, even with small cold hands.

Whyte 403 MTB 2017 Specification

• Frame: 6061 Hydro Formed T6 Aluminium, Multi Butted, Get A Grip seat clamp
• System, Internal Cable routing with BBX, Post Mount Chainstay Dropouts
• Fork: Suntour, XCR, 100mm Travel, 32mm, HYDRO Lock-out, Air Spring,
• Adjustable Rebound, Post Mount
• Rear Shock N/A
• Headset: FSA No.10, Semi integrated, Caged Bearings
• Rear Hub: Alloy, Cup & Cone, Double Seal, 28 Hole
• Front Hub: Alloy, Cup & Cone, Double Seal, 28 Hole
• Spokes: 2.0mm, Black Stainless with Brass Nipples
• Rims: WTB SX-19, 28 Hole 26"
• Tyres WTB Bronson Race, 26" X 2.1", Front, WTB Riddler, 26" X 1.95", Rear
• Shift Levers: Shimano 8-Speed REVO Grip Shifter
• Front Derailleur: N/A
• Rear Derailleur: Shimano ALTUS
• Cassette: Sunrace 8 Speed, ED Black 11-40T
• Chain: KMC 8 Speed
• Crankset: 28T Narrow/Wide Chainring, 165mm Crank Length
• Bottom Bracket: TH Sealed, Square Taper
• Seatpost: Whyte 20mm Offset, 30.9mm x 300mm, 6061 Alloy, 2 Bolt Clamp
• Seat: Whyte Custom
• Bar: Whyte Riser Bar 30mm rise DB, 31.8mm, 640mm Wide
• Stem: Whyte Custom, 45mm
• Grips: Whyte Custom
• Front Brakes: Promax Solve, 160mm Rotor
• Rear Brakes: Promax Solve, 160mm Rotor
• Brake Levers Promax Solve, Short Reach
• Pedals: Fibre Reinforced Composite Platform
• Colour: Matt Lime with Denim/Black
• Sizes Available: 13"

Frame Series 2 custom butted and hydroformed 6061 alloy tubeset / X44 headtube / UK developed

Rear Shock N/A

Fork Suntour XCR AIR / 80mm travel / air spring / lock-out

Headset Neco cartridge

Shifters Shimano Altus M370 Rapidfire 1x9 speed

Rear Derailleur Shimano Alivio M4000

Front Derailleur N/A

Chainset Custom forged alloy crank 30T narrow wide 140mm

Bottom Bracket Neco sealed cartridge

Chain KMC Z99

Cassette / Freewheel Shimano HG300 9 speed cassette 12-36T

Rims Saracen doublewall alloy 28h

Hubs KT alloy disc 28h front / rear

Spokes Steel 14g

Tyres Kenda Small Block 8 24 x 1.95" / 60tpi

Brakes Promax Solve S hydraulic 160/160mm

Brake levers Promax Solve S

Handlebars Saracen OS 6061 DB alloy riser bar / 580mm wide / 12.7mm rise / 5 degree up bend / 9 degree back bend

Grips / Tape Saracen lock-on grip

Stem Saracen 6061 3D-forged alloy / 40mm / A-head / 7 degree rise / 31.8mm clamp

Saddle Saracen custom JNR

Seatpost Alloy micro-adjust / 30.9mm

Pedals Resin body / non-slip rubber insert

Weight 10.48

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer.

Tacx USB Ant+ Antenna is compatible with all trainers that communicate wirelessly via ANT+. These are the Tacx ANT+ trainers and Smart trainers, but also third party trainers. Due to the long length of the cable, the receiver can be placed close to the trainer for an optimal reception without loss.

Stages Power meter is built onto a Campagnolo Record non-drive crank arm. This meter comes ready to bolt on, including Campagnolo’s Ultra-Torque non-drive bottom bracket bearing.

Stages Power Meter Carbon G2 Campagnolo Record Crank have been two years in the making and feature a custom developed strain gage that precisely measures your power through the structure of a Campagnolo-designed hollow carbon crank arm.

Stages Power Meter Carbon G2 Campagnolo Record is slimmer, and up to 28-percent lower profile than Stages original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.

Stages Power Meter Carbon G2 Campagnolo Record Specifications

• Accuracy: ± 2%
• Weight: Only less than 20gr to base crank arm
• Battery Life: 200+ hours (coin cell: CR2032)
• Power range (Watts): 0 - 2500
• Cadence range (rpm): 20 - 220
• Water resistance rating: IPX7
• Frame Compatibility: Most frames, see fit guide in our Support section
• Crank Compatibility: Campagnolo Record
• Device Compatibility: ANT+, Bluetooth Smart Ready
• Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others
• Length: 170mm, 172.5mm, 175mm

Stages Power Meter Carbon G2 Campagnolo Record Additional Features

• Tool free battery replacement
• Active temperature compensation
• Accelerometer based cadence measurement
• Wireless firmware upgrades

The FC-C6000 Nexus chainwheel is a sleek uncluttered modern design leisure chainwheel

Painted aluminium crank arm for long lasting good looks

170 mm crank arm length and 38T chainring

The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.

Enve 4.5 SES Tubular Wheelset With Chris King Hub is the ultimate everyday carbon fiber cycling wheelset and choice of Team MTN - Qhubeka. Designed for road cyclists and triathletes looking to minimize the trade off between aerodynamics, lightweight, and stability.

Enve 4.5 SES Tubular Wheelset With Chris King Hub Specifications Front / Rear

• Material: Carbon Fiber
• Rim Depth: 48 / 56
• Internal Rim Width: 18.5 / 17
• External Rim Width: 27 / 25.5
• ERD: 563 / 545
• Built Weight: 1312.00
• Rim Weight: 361 / 399
• Recommended Tire Size: 23mm - 25mm

DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer and the new Qalvin BLE app.Quarq’s next generation in power meters, compatible with 10- and 11-speed drivetrains. DZero Aluminum does not work with BBright or BB386EVO bottom brackets.

Sram Quarq DZero Alloy Power Meter Crankset Features & Benefits

• Forged aluminum crank arms.
• Bluetooth low energy technology and ANT+ wireless data transfer.
• AxCad – no cadence magnet required.
• 10K Temperature Compensation.
• Battery – CR2032, 200-hour battery life, change without tools.
• Power Balance.
• OmniCal – swap chainrings without affecting accuracy.
• 2-year warranty.
• IPX7 waterproof rating.
• Accuracy – within 1.5%, measuring both legs.
• Free firmware upgrades with the Qalvin app.

Sram Quarq DZero Alloy Power Meter Crankset Essential Details

• Variations include Hidden Bolt (HB), Non-hidden Bolt (NHB).
• Pairing a HB version and SRAM Chainrings will align the chain derailment pin and crank arm.
• NHB versions work with traditional 5-bolt chainrings from most manufacturers.
• Forged aluminum models do not work with BBright or BB386EVO bottom brackets.
• Please Note Chainrings Are Sold Seperately

Time trail specific saddle providing a super flat profile in addition to a reduced nose length, it favours an aero tuck and front of saddle riding position. Tirox Rail light-alloy steel provides a good balance between weight and strength. The PAS system was designed to eliminate pressure to a zone of support delicate as the pelvic area.

Prologo Zero Tri Pas Tirox Saddle Specifications

• Size (mm): 254 x 136
• Weight (gr): 250
• Base: Carbon Fibre Injection
• Rails: Tirox
• Cover: Microfiber
• Padding: Light Foam

Rotor OCP3 Aero Q Outer Chainring 5 Bolt Specification

• 100% CNC-machined, 7075-T6 aluminum alloy
• Aero design reinforced rigidity and aerodynamics
• Steel shifting pins
• OCP set to position 3
• Designed to work with all 9, 10 and 11 speed groupsets
• Designed for cranks that do not work with classic Q-Rings such as Ultegra 6700 series

The versatility of this wheelset brings results on any terrain and in any weather, and adding the advantages of the new generation. Thanks to the wide, aerodynamic profile, the differentiated diameter of the hubs and CUlT bearings, every user will be able to race with the performance of champions and brake in total safety, in any conditions, thanks to 3Diamant technology on the braking track.

Campagnolo Bora Ultra 35 Tubular Wheelset Features

• NEW FULL-CARBON RIM, 24.2 MM WIDE, FOR TUBULARS AND CLINCHERS: great comfort and maximum aerodynamics for
• interacting with new tire standards. Extremely high lateral wheel stiffness and reactivity.
• 3DIAMANT(tm) - BRAKE SURFACE TREATMENT: using advanced machinery and state of the art diamond tipped precision tools, eliminates imperfections. This new process eliminates the "breaking-in" period, improves braking performance under both wet and dry conditions and creates a more linear and smooth overall braking performance.
• BRAKE PADS MADE ESPECIALLY FOR CARBON WHEELS
• DYNAMIC BALANCING ON THE RIM
• AERODYNAMIC PROFILE IN STEEL: ensuring the maximum aerodynamic penetration and, thanks to the material employed, lower weight and greater reactivity.
• EXCLUSIVE G3(tm) SPOKE PATTERN: perfect balance of the spoke tensions on both sides of the wheel. Reduces stress, increases transversal rigidity and the transmission of power to the wheel. G3(tm) eliminates vibrations even with "heavy" cyclists.
• SELF-LOCKING ALUMINUM NIPPLES
• CARBON FIBRE HUB: provides a high degree of lateral stiffness and reduces weight to the minimum.
• OVERSIZED FLANGE: greater torsional stiffness and greater reactivity.
• CULT(tm): the combination of the highest quality ceramic bearings and housing in special Cronitect® steel. Nine times smoother than the standard system.
• CUP AND CONE BEARINGS
• ALUMINUM AXLE
• QUICK RELEASE: new, completely redesigned and lighter aerodynamic-profile wheel block. Steel spine and eccentric, lever with drill lightening and aluminum die. Eccentric-closure system allows cyclist to modulate the pressure necessary for heightened sensitivity to find the proper closure for the block. Easy to use, with a material resistant to wear and tear, rust, and pressure.
• Weight 1160g

This new rim is now laced to the maintenance-free 177 hubset to create a superlight rear wheel, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed, this wheel will keep you ahead of the rest.

Zipp 202 Firecrest Carbon Clincher 177 Rear Wheel Specification

• Weight 815g
• Hub Used 177
• Rim Depth 32mm
• Brake Track Width (center) 24.62mm
• Max Width 25.4mm
• Spokes Sapim® CX-Sprint
• Spoke Count 24
• Spoke Length Non-Drive 284mm
• Spoke Pattern Non-Drive 2 cross
• Spoke Pattern Drive 2 cross
• Spoke Length Drive 284mm
• Max Tyre Pressure 125psi
• 11-speed compatible hub Yes
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim®
• External Nipples Yes
• Max recommended rider weight 250lbs
• Colour Options Matte Black Or Matte White Decals

This brand is synonymous with delivering cutting edge technologies and these brake shoes prove this with sheer braking perfection.

Aztec V-Brake Cartridge Shoe Features

• V-Type
• Cartridge brake shoes set
• Very light weight with high stiffness
• Advanced Alloy Compound:This is an outstanding compound that gives excellent performance on all alloy rims, giving market leading performance in both dry/wet conditions.

Quality design

Lightweight groove cut

Cartridge shoe

Weight: 176g

Essential for repairing derailleur hanger threads where the dropout cannot be replaced (and is wider than 7 mm). Drill out the dropout with the kit included 15/32 inch drill bit and press the saver into place. An essential workshop tool to help with repairs to steel frames.

Durable and low maintenance quality give you more relax time. 8-speed drivetrain provides on optimal range of gears for on-road riding. This derailleur features an advanced light action for low-friction shifting up or down the block.

Shimano Claris 2400 8 Speed Rear Derailleur Features

• Sure shifting and light pedaling
• SIS, 8-speed drivetrain
• Light action spring
• Wide Link design
• 32T maximum sprocket

Allows information to be sent wirelessly via ANT+ private network to compatible cycle computers.

Simano EW-WU111 E-tube Di2 Wireless Unit Inline Features

• Information can be displayed about gear position and Di2 battery level
• Clean integration and installation with E-tube system
• Internal chip enables system wireless functionality of Bluetooth components
• Plug tool required for inserting and removing E-tube Di2 wires
• To be used in conjunction with BT-DN110 or SM-BTR1
• Average weight 5 grams

Giro pioneered the aerodynamic helmet category with the original Advantage in 1985, and now they’re redefining it with the new Aerohead(tm) Ultimate MIPS – their fastest time trial helmet ever. Giro leveraged every resource available to create a helmet that tops the podium in speed, weight, style and comfort.

Giro Aerohead Ultimate Mips Helmet shell is constructed with TeXtreme(tm) carbon fiber, an advanced material that is lighter and stronger than other carbon composites. The wrap-around eye shield offers an unblocked field of view with a huge aerodynamic benefit and the shield is made by ZEISS® Optics for unrivaled clarity. A magnetic anchor attachment keeps the shield secure, yet easy to remove, and it can be stored in the “flipped up” position.

Giro Aerohead Ultimate Mips Helmet includes a Roc Loc® Air fit system and a hydrophilic, anti-microbial brow pad that can absorb up to ten-times the amount of sweat as standard urethane padding. Additionally, this helmet is quipped with the MIPS system to redirect impact energy, providing more protection in certain impacts

Giro Aerohead Ultimate Mips Helmet Specification

• TeXtreme® carbon fiber shell
• Super Fit Engineering
• Eye shield made by ZEISS® Optics
• Magnetic lens anchor attachment
• MIPS® technology
• Hydrophilic padding with X-Static anti-microbial fabric
• Hybrid Construction, TeXtreme(tm) carbon fiber shell with in-molded EPS liner
• Fit System Roc Loc® Air
• Ventilation Vented Shield, Over-brow ventilation, Internal channeling
• Weight 450g
• Included Accessories
• Helmet Pod for traveling, second clear shield

Designed with Gold in mind. Argon 18 paired with Denmark, one of the best Pursuit teams in the world, with the goal of shaving a precious few seconds off the clock. This bike endures monstrous power output in the velodrome and yet, handles with absolute precision at break neck speeds.

Argon 18 Electron Pro Track Frameset with integrated front end was designed to increase aerodynamic efficiency and minimize deflection of the head tube under load, thus giving every advantage to the competitive athlete.

Argon 18 Electron Pro Track Frameset Highlights

• A modular cockpit design allows you to easily swap between drop bar and pursuit bar (optional)
• Custom Designed Anti-Rotation Saddle Rail Clamp Ensures the saddle stays put under the highest power output
  23mm tire clearance
• Replaceable stainless steel horizontal dropouts
• BSA bottom bracket
• Stainless steel dropout inserts
• Optimal Balance Stiffness, aerodynamics and lightweight balanced in perfect harmony
• Modular Handlebar Optional pursuit bar integrates seamlessly into the frame for maximum aerodynamic impact
• One-Piece Direct-Mount Handlebar Ultimate power transfer for standing starts
• Zero-Wake Handlebar Integrated Fully Into The Top Tube Dramatically reduces drag
• More Adjustability Flipable clamps / 5mm intervals between 0 and +100mm stack
• Extra Long Extension Bars Can be trimmed to be used as either straight bars or 40 degrees bends
• Hyperprecise Positioning Cockpit adjustable in 3 axes: 320 possible configurations to fine-tune an athlete’s perfect fit

Ready for adventure with this UST-compliant super wide 19mm internal rim width for increased air volume. Can be used with 28mm Yksion Elite Guard on paved roads or 30mm Yksion Elite Allroad on gravel terrains.

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 strength to weight is key and with Superlight ISM 4D rims weigh just 430 grams each, light and strong double butted steel spokes combined with tough and light new Instant Drive 360 freewheel system this wheelset has it all.

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 are smartly adapted to the constraints of disc brakes 24 spokes front and rear for perfect brake torque distribution. Front hub convertible from quick release to 12 and 15mm through axles. Rear hub convertible from 12x142 through axle to quick release (with optional adapters ). Available in either 6 Bolts or Center Lock. Also XD Road compatible, with an optional driver body.

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 Compatibility

Rear axle: 12mm thru axle, convertible to Quick Release with optional adapters

Front axle: convertible from 12mm thru axle to quick release or 15mm thru axle with optional adapters

Freewheel: Shimano/Sram, convertible to Campagnolo and XD-R with optional driver bodies

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 Specification

Rims

ETRTO size: 622x19C

Height: 26mm, asymmetrical

Weight reduction: ISM 4D

Internal width: 19 mm

Disc brake specific profile

Valve hole diameter: 6.5 mm

Tyre: UST Tubeless and tubetype

Drilling: Fore

Joint: SUP

Material: Maxtal

Hubs

Front: Quick release, 12x100 and 15x100 compatible

Rear: Quick Release, 12x142 and 12x135 compatible

Freewheel: Instant Drive 360

Front and rear bodies: aluminum

Axle material: aluminum

Sealed cartridge bearings

Spokes

Material: steel

Shape: straight pull, bladed

Lacing: front crossed 2, rear Isopulse

Nipples: Fore integrated aluminum

Count: 24 front and rear

Tyre

UST Ready (Yksion Elite Allroad only)

Dimensions: 28-622 (700x28c) or 30-622 (700x30C)

Yksion Elite Guard or Yksion Elite Allroad

Breaker: Polyamide, from bead to bead

Casing: 120 TPI

Front and Rear Tread: Single Compound

Versions

Disc standard : 6 Bolts or Center Lock(R)

Colour: Black only

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 Weight

Pair without tyre: 1690 grams

Front without tyre: 780 grams

Rear without tyre: 910 grams

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 Delivered with

Front 12 mm adapters

Rear 12x142mm adapters for Instant Drive 360

Mavic tyre sealant (rear wheel)

Multifunction adjustment wrench

Specific disc bolts

UST valve and accessories

User guide

Mavic Ksyrium Elite Allroad Disc Wheelset 2017 Intended Use

For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike included

ASTM CATEGORY 2 : road and offroad with jumps less than 15cm

Max. Pressure: 28mm 7.7 bars - 110 PSI / 30mm 5.8 bars - 85 PSI

Recommended tyre sizes: 28 to 42 mm

On today's MTB forks, there are many front axle standards. Most Mavic wheel can be fitted with specific adapters to match with the fork diameter. Mavic’s 20 mm diameter hub can be used with 20x110, 15x100 or QR adapters. and their 15 mm diameter hub can be converted to QR.

Designed for Shimano®’s lightweight, ergonomic Dura-Ace® groupset, DFour is Quarq’s most advanced Shimano®-compatible power meter ever. DFour embodies 10 years of Quarq technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets.

Sram Quarq DFour Power Meter Crankset works with Shimano®’s 11-speed Dura-Ace® 9000, Ultegra® 6800 and 105® 5800 chainrings. Please Note Chainrings Are Sold Seperately

Sram Quarq DFour Power Meter Crankset Features

• Exogram carbon crank arms.
• Bluetooth low energy technology and ANT+ wireless data transfer.
• AxCad – no cadence magnet required.
• 10K Temperature Compensation.
• Battery – CR2032, 200-hour battery life, change without tools.
• Power Balance.
• OmniCal – swap chainrings without affecting accuracy.
• 2-year warranty.
• IPX7 waterproof rating.
• Accuracy – within 1.5%, measuring both legs.
• Free firmware upgrades with the Qalvin app

Sram Quarq DFour Power Meter Crankset Additional Information

• Bolt Circle Diameter Shimano® 4-Arm
• Compatibility Shimano® 11-speed chainrings (except Dura-Ace® R9100). Designed for Dura-Ace® 9000. Compatible with Ultegra® 6800 and 105® 5800.
• Material CNC Machined Aluminum Spider, Exogram Carbon Crank Arms
• Accuracy 1.5%
• Bottom Bracket GXP, Press Fit GXP, BB30, Press Fit 30, BBright, BB386EVO, BB30A, PF30A
• Q Factor 145mm
• Wireless Technology ANT+, Bluetooth low energy technology
• Battery CR2032, 200 hours of riding time
• Weight 588g

Sram Quarq DFour Power Meter Crankset Essential Details

• Designed for Dura-Ace® 9000 chainrings. Compatible with Ultegra® 6800 and 105® 5800 chainrings.
• Must be paired with a compatible SRAM bottom bracket
• Quarq ELSA RS Power Meter owners can upgrade using aDFour Power Meter Spider
• BB30 versions ship with the spacers and wave washer required for BB386EVO installation.

This is a thoroughbred racer in an endurance disguise. Ridley took all the best of the Fenix, Helium SL and Noah SL, and put it into the Fenix SL. The stiff and aerodynamic headtube, combined with the strong bottom bracket and the light and narrow seatstays do not only make it look sexy, they make it fast as well. Ridley could only just get some of the Lotto Soudal riders to give their bikes back after they were done testing the Fenix SL.

Ridley Fenix SL Ultegra Bike Specification

• Frame: Fenix SL, 30T-24T HM Unidirectional carbon
• Fork: Fenix SL, 30T-24T HM Unidirectional carbon
• Rear Derailleur: Shimano Ultegra
• Front Derailleur: Shimano Ultegra
• Crankset: Shimano Ultegra
• Shifters: Shimano Ultegra
• Cassette: Shimano 105, 11-28
• Chain: KMC X11
• Brakes: Shimano Ultegra
• Wheelset: 4ZA RC23 SL
• Tires: Continental Ultrasport Folding 25mm
• Stem: New 4ZA Stratos
• Handlebar: 4ZA Stratos E2
• Seatpost: New 4ZA Stratos 27,2x350
• Saddle: 4ZA Cirrus Pro, Cr/Ti rails

Specifications are subject to change without notice.

Designed to orient the chainring around your unique pedaling characteristics, and feature 16% ovality for a more pronounced power output. Choose from 5 Optimum Chainring Positions (OCP) that can be adjusted to take advantage of the strongest point of pedal stroke.

Rotor QXL Inner Chainring 5 Bolt noticeably improve out of the saddle riding (sprint or climb), helping most during moments of maximum effort when the "dead spots" become far more critical.

Rotor QXL Inner Chainring 5 Bolt Features

• 100% CNC-machined, 7075-T6 aluminum alloy
• Aero design: reinforced rigidity and aerodynamics
• Steel shifting pins
• 5 OCP points
• Designed to work with all 9, 10 and 11 speed groupsets
• Specific bolt covers for improved aesthetics (sold separately)
• Available sizes 110 Bcd: 38 or 36T
• Available sizes 130 Bcd: 41 or 44T

Compatible with Shimano 110x4 bolt pattern cranksets. These chainrings are preferential for riders with dominant fast-twitch muscle (fast deactivation dynamics) build looking for more ovality to achieve their potential.

Rotor QXL Inner Chainring Shimano 4 Bolt noticeably improve out of the saddle riding (sprint or climb), helping most during moments of maximum effort when the "dead spots" become far more critical.

Rotor QXL Inner Chainring Shimano 4 Bolt Features

• 100% CNC-machined, 7075-T6 aluminum alloy
• Aero design: reinforced rigidity and aerodynamics
• Steel shifting pins
• 3 OCP points (2-3-4)
• Designed to work with all 9, 10 and 11 speed groupsets
• Specific bolt covers for improved aesthetics (sold separately)
• Available sizes 110 Bcd: 44 and 38T

There’s no need to swap out your Shimano cranks to accommodate Q-Rings, Rotor has crafted Q-Rings Shimano 110x4 just for you. In addition to biomechanical performance, there was one more important factor when designing Rotor Q-Rings, compatibility. Rotor wanted everyone to be able to ride Q-Rings so they designed special Q´s for cranks requiring a specific bolt pattern.

Rotor QXL Aero Outer Chainring Shimano 4 Bolt feature subtle 10% ovality and take advantage of the most-productive part of your pedal stroke by working with your body´s biomechanics to yield maximum efficiency. Choose from 5 Optimum Chainring Positions (OCP) to fine-tune your improved riding experience and go further and faster with less fatigue

Rotor QXL Aero Outer Chainring Shimano 4 Bolt Features

• 100% CNC-machined, 7075-T6 aluminum alloy
• Aero design: reinforced rigidity and aerodynamics
• Steel shifting pins
• 3 OCP points (2-3-4)
• Designed to work with all 9, 10 and 11 speed groupsets
• Specific bolt covers for improved aesthetics (sold separately)
• Available sizes 110 Bcd: 54, 53 and 52T

Sustaining maximum output defines your primary race goal; go too hard on the bike and suffer on the run, but go too easy and forfeit the podium. By distributing the work more efficiently between muscle groups, these wind-shucking QXL aero oval chainrings enable you to go farther and faster with less fatigue.

Rotor QXL Aero Outer Chainring 5 Bolt have been designed to orient the chainring around your unique pedaling characteristics, and feature 16% ovality for a more pronounced power output. Choose from 5 Optimum Chainring Positions (OCP) that can be adjusted to take advantage of the strongest point of pedal stroke.

Rotor QXL Aero Outer Chainring 5 Bolt Features

• Design works for all 10 and 11 speed groups.
• 100% CNC-machined, 7075-T6 aluminum alloy
• Aero design: reinforced rigidity and aerodynamics
• Steel shifting pins
• 5 OCP points
• Available sizes 110 Bcd: 53, 52 and 50T
• Available sizes 130 Bcd: 54 and 53T

Designed to boost your cycling performance by varying drivetrain resistance inline with your legs´ natural strengths and weaknesses when pedaling. 5 Optimum Chainring Positions (OCP) allow you to fine-tune your improved riding experience by orienting your chainrings around the most productive part of your pedal stroke.

Rotor Q Inner Chainring 5 Bolt with subtle but efficient 10% ovality and compatible with 110 and 130BCD cranks, Q-Rings work with your body´s biomechanics to yield maximum efficiency and enable you to go further and faster with less fatigue.

Rotor Q Inner Chainring 5 Bolt Features

• Available sizes 110 Bcd: 42, 39, 38, 36 and 34T
• Available sizes 130 Bcd: 44, 42 and 39T
• 100% CNC 7075-T6 aluminum.
• Steel shifting pins.
• 5 OCP regulation points.
• Design works for all 10 and 11 speed groups.

These are non aero open chainring, CNC machined from aircraft grade 7075 T6 anodized aluminium. Ramped and pinned for high performance. These chainrings are stiff, lightweight and durable.

Rotor Road Q Outer Chainring 5 Bolt are available in 110 or 130 bcd and compatible with FSA, SRAM and Shimano 5 bolt pattern.Q-Rings can increase an avid cyclist’s performance by as much as 4 seconds per km in a sprint that’s twice the benefit of an aero wheelset!

Rotor Road Q Outer Chainring 5 Bolt Features

• 7075 T6 anodized aluminium
• Steel shifting pins.
• 5 OCP regulation points
• Lightweight, stiff, durable
• Size available in 110 BCD 48, 50, 52 and 53T
• Size available in 130 BCD 52 or 53T

Please note for Shimano Ultegra 6700/ Dura Ace 7900 please select OCP-3 Q-Rings.

The rear wheel delivers lower drag than the outgoing version when used with 25c or wider tires. The aerodynamic performance gap between a narrower rim and the new 303 grows even larger with 28c and wider tires thanks to a smoother transition between the tire’s profile and Zipp’s new rim shape.

Zipp 303 Clincher Tubeless Disc Rear Wheel ensure compatibility with any bike, thanks to versatile 177D hub which comes with swappable end caps to work with QR’s and thru-axles, including 12x135mm and 12x142mm rear thru-axles. The 177D rear hub is also XDR freehub body compatible (sold separately) for use with SRAM 10-42 cassettes.

Zipp 303 Clincher Tubeless Disc Rear Wheel Includes

•Zipp Tubeless valve extender and valve-core wrench

•Zipp rim tape (factory taped)

•Zipp Tangente quick-release skewer

•Zipp thru-axle end caps

Zipp 303 Clincher Tubeless Disc Rear Wheel Specification

• Weight 885g
• Hub Used 177D
• Hub Width 135mm
• Rim Depth 45mm
• Max Width 29.9mm
• Internal Width 21mm
• Spokes Sapim® CX-Ray®
• Spoke Count 24
• Spoke Length Non-Drive 272mm
• Spoke Pattern Non-Drive 2 cross
• Spoke Pattern Drive 2 cross
• Spoke Length Drive 270mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62bars
• 10 or 11-speed compatible hub Yes
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim® Secure Lock
• External Nipples Yes
• Thru Axle Compatible Yes
• XDR Compatible Yes
• Tubeless Yes
• Max recommended rider weight 250lbs

With an all-new disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. The 45mm deep 303 delivers unmatched aero performance when used with the wide tires that today’s riding demands. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability.

Zipp 303 Carbon Clincher Tubeless Disc Front Wheel Includes

•Zipp Tubeless valve extender and valve-core wrench

•Zipp rim tape (factory taped)

•Zipp Tangente quick-release skewer

•Zipp 12 and 15mm thru-axle end caps

Zipp 303 Carbon Clincher Tubeless Disc Front Wheel Specification

• Weight 760g
• Hub Used 77D
• Hub Width 100mm
• Rim Depth 45mm
• Max Width 29.9mm
• Internal Width 21mm
• Spokes Sapim® CX-Ray®
• Spoke Count 24
• Spoke Pattern 2 cross
• Spoke Length Drive 272mm
• Spoke Length Non-Drive 270mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62bars
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim® Secure Lock
• External Nipples Yes
• Thru Axle Compatible Yes
• Tubeless Yes
• Max recommended rider weight 250lbs

A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while the robust 77/177D hubset, paired with 24 Sapim® CX-Ray spokes front and rear, keep the wheels stiff and responsive.

Zipp 303 Firecrest Carbon Clincher Tubeless Disc Wheelset 2017 ensure compatibility with any bike, thnaks to versatile 77/177D hubs which come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x135mm and 12x142mm rear thru-axles. The 177D rear hub is also XDR freehub body compatible (sold seperately) for use with SRAM 10-42 cassettes.

Zipp 303 Firecrest Carbon Clincher Tubeless Disc Wheelset 2017 is laid up, molded, drilled and assembled in Indianapolis, USA. Built to take you to places you’ve never been, the 303 Firecrest® Tubeless Carbon Cincher will go the distance. It’ll just take less time.

Zipp 303 Firecrest Carbon Clincher Tubeless Disc Wheelset 2017 Includes

•Zipp Tubeless valve extender and valve-core wrench

•Zipp rim tape (factory taped)

•Zipp Tangente quick-release skewer

•Zipp thru-axle end caps

Zipp 303 Firecrest Carbon Clincher Tubeless Disc Wheelset 2017 Specification

Front Wheel

• Weight 760g
• Hub Used 77D
• Hub Width 100mm
• Rim Depth 45mm
• Max Width 29.9mm
• Internal Width 21mm
• Spokes Sapim® CX-Ray®
• Spoke Count 24
• Spoke Pattern 2 cross
• Spoke Length Drive 272mm
• Spoke Length Non-Drive 270mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62bars
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim® Secure Lock
• External Nipples Yes
• Thru Axle Compatible Yes
• Tubeless Yes

Rear Wheel

• Weight 885g
• Hub Used 177D
• Hub Width 135mm
• Rim Depth 45mm
• Max Width 29.9mm
• Internal Width 21mm
• Spokes Sapim® CX-Ray®
• Spoke Count 24
• Spoke Length Non-Drive 272mm
• Spoke Pattern Non-Drive 2 cross
• Spoke Pattern Drive 2 cross
• Spoke Length Drive 270mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62bars
• 10 or 11-speed compatible hub Yes
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim® Secure Lock
• External Nipples Yes
• Thru Axle Compatible Yes
• XDR Compatible Yes
• Tubeless Yes

• Set Weight 1645g
• Max recommended rider weight 250lbs

The innovative Speedplay Platformer 2.0 is a user-friendly, tool-free platform cover for Zero pedals.The Platformer makes it easy to convert from clipless pedals to platforms for riding with street shoes.

PLEASE NOTE PEDALS ARE NOT INCLUDED IMAGE IS FOR ILLUSTRATION ONLY

COMPATIBLE WITH ZERO PEDALS ONLY

These are a superb set of sunglasses for those bright days. These sunglasses make an ideal present and a must have for the Bianchi fan.

Bianchi Cafe & Cycles Sunglasses Features

• Frame material Policarbonate, Grimalid TR90
• Colour Matt Celeste
• Lenses Photocromic smoke with skyblue revo coating
• Case Black hard shell with Bianchi & Cycles logo and microfiber pouch

At the center of this wheel is Zipp’s 177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved stiffness, durability, simplicity and versatility.

Zipp 404 Firecrest Carbon Clincher 177 Rear Wheel includes Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape and quick release.

Zipp 404 Firecrest Carbon Clincher 177 Rear Wheel Specification

• Weight 935g
• Hub Used 177
• Rim Depth 58mm
• Brake Track Width (center) 24.73mm
• Max Width 26.53mm
• Clincher Bead Width 16.25mm
• Spokes Sapim® CX-Sprint
• Spoke Count 24
• Spoke Length Non-Drive 260mm
• Spoke Pattern Non-Drive 2 cross
• Spoke Pattern Drive 2 cross
• Spoke Length Drive 258mm
• Max Tire Pressure 125psi
• Max Tire Pressure 8.62 bars
• 11-speed compatible hub Yes
• Track Adaptable No
• Dimpled Surface Yes
• Nipples Sapim®
• External Nipples Yes
• Set Weight 1690g
• Max recommended rider weight 250lbs

Many pro enduro racers use these technical trail shorts in training, because they’re tough but still really light and comfortable. That combination of tough and comfortable comes from their Trail Tech ST fabric. This is sleek and durable on the outside to keep you protected from scuffs, scratches and stray branches. Then slightly brushed on the inside to make them soft against your legs.

Mavic Crossmax XM Pro Shorts has extra comfort from breathable mesh inserts and, most importantly, Mavic’s upgraded Ergo 3D insert. This comes as part of a removable inner short, which gives you amazing cushioning and vibration damping – with three different densities and six different thicknesses of perforated foam. The outer shorts are loose enough to move freely over your knee protectors. The inner shorts are secured by silicone leg grips, so your padding stays exactly where you need it.

Mavic Crossmax XM Pro Shorts Features

• Combination of durability and comfort
• Upgraded Ergo 3D Insert offers comfort and performance via progressive cushioning with 3 different densities and 6 different thicknesses of pre-shaped foam Trail Tech ST provides lightweight protection, comfort and increased range of movement
• Air cooling management
• Mesh inserts increase air cooling
• Distinctive Crossmax design
• Large choice of color options Endorsed and used by pro athletes

Mavic Crossmax XM Pro Shorts Specification

• Ergo 3D Elite Insert
• Fabrics Trail Tech ST
• Delivered with removable innershort
• Inseam length: 36 cm/14 inches
• Inside silicone leg grip
• Mesh inserts
• Bonded bottom hem
• Pockets 2 front pockets
• Label Hot Ride
• Bluesign® approved fabric

This saddle is made by Italian saddle manufacturer Selle Italia for Colnago. The SLR Flow is lightweight and strong and provides superb comfort.

Colnago SLR Flow Saddle Specification

• Covering in breathable full-grain leather
• Self-modelling padding - Perfect Fit
• 30% Carbon composite Shell
• Anatomic cut-out
• Rail Vanox Tube
• W 131 x L 275mm

Conventional threaded bottom brackets like your English-threaded BB shell shouldn't foil plans to upgrade your ride. ROTOR conceived its Universal Bottom Bracket (UBB) concept to eliminate the complicated bottom bracket/crank compatibility challenge that has increasingly frustrated mechanics.

Rotor BB1 Ceramic Road Bottom Bracket Specification

• 100% CNC-machined, 7075 aluminum
• Labyrinth seals prevent bearing contamination
• Designed to work with ROTOR and Shimano 24mm cranksets
• BB1 68mm BSA road ceramic black - 91g
• Designed to work with BSA threaded bottom brackets

This crankset with 100% CNC-machined 7075 aluminum alloy (used in aircraft fittings) and developed with feedback from the world´s top athletes, the 3D24 is strong but lightweight and will react to whatever wattage you can force on it.

Rotor 3D24 Aero Crankset is based on the design of the top-of-the-line 3D+ crank, the CNC-machined 3D24 130 is enhanced by proprietary Trinity Drilling System (TDS) triple drilling technology to yield perfect stiffness-to-weight ratio. Developed with feedback from top pro cyclists and world champions, ROTOR was able to design a crank that was strong but light, and maintained its stiffness in high-powered sprint finishes.

Rotor 3D24 Aero Crankset Specification

• Weight:172.5mm length 130 Aero 582g
• Sizes: 165/170/172.5/175mm
• Spider: 130BCD Aero
• Spindle: 24mm steel
• Q-Factor: 148 mm
• Chainline: 43.5mm
• Material: aluminum alloy T6 7075 100% CNC-machined
• Compatibility: Bottom bracket BSA, ITA, BB86, BB90, BB30, BB30A, PF30, BBRight, BB386 Evo, Oval and round chainrings, 130 BCD, 9,10 and 11 Speed

Light thermal protection with brushed fabric. Designed for cool weather rides, with light thermal protection from comfortable brushed fabric. Breathable, comfortable underhelmet cap for cool weather rides

Mavic Spring Underhelmet Cap Features

• Ear protection
• Fits perfectly with Mavic helmet
• Silicone grip to hold glasses arms in place

Mavic Spring Underhelmet Cap Specification

• Body: PES 91%, EL 9%
• Silicone grip to maintain glasses arms

A little extra warmth for the neck. Warm Power fabric is breathable, durable and is exceptionally soft. Micro Vents enhance breathability when needed.

Mavic Neck Warmer Specification

• Body: PES 88%, EL 12%
• Fabrics Warm Power
• Micro vents

A comfortable, great-value knee warmer made with Warm Power fabric. Durable Meryl® Skinlife provides great moisture management and durability. Ergo Grip increases blood flow, improves comfort and keeps the warmer in place.

Mavic Aksium Knee Warmers Specification

• Body: PA 80%, EL 20%
• Flatlock seams
• Reflective highlights
• Fabrics Warm Power
• Ergo Grip

This is a high cut, mid weight sock with trail styling. Extra durable, higher cut sock designed for single track. Durable Meryl® Skinlife provides great moisture management and durability.

Mavic Crossmax High Socks Features

• Soft Meryl® Skinlife fibre maintains the natural balance of the skin, and provides odor control.
• Reinforced heel and toe for more cushioning
• Left and Right specific anatomy

Mavic Crossmax High Socks Specification

• Body: PA 96%, EL 4%
• Meryl® Skinlife
• Silver Ions
• Open structure for increased breathability

This glove is an everyday race glove featuring excellent cushioning with Ergo Palm progressive with EVA. Cuff tab for adjustable width and easy entry.

Mavic Aksium Women's Glove Features

• Ergo Palm, EVA Foam for great cushioning
• Ergo tab, an ergonomic tab that makes easy to put on or take off gloves
• Ergo Cut, a pre-shaped patterning, increases flexible fit and allows maximum range of movement
• Ergo Strap, an ergonomic, adjustable palm, hook and loop closure
• Lined Terry Thumb Insert

Mavic Aksium Women's Glove Specification

• Back: PA 82%, EL 18%
• Back Insert: PES 100%
• Palm: PA 60%, PU 40%
• Backhand: Sleek Stretch
• Washable
• Palm: Clarino(tm)
• Cuff tab for adjustable width
• Lined Terry Thumb Insert
• Fabrics Clarino(tm)

Ride with more comfort on long rides with this Women’s glove. Excellent cushioning with Ergo Endurance Palm, 3 zones of Gel and EVA foams developed for long distance rides. Ergo Cut, a pre-shaped patterning, increases flexible fit and allows maximum range of movement.

Mavic Ksyrium Elite Women's Glove Features

• Ergo Strap, an ergonomic, adjustable palm
• Hand hook and loop closure stretch and UV protection
• Stretch Lycra® fabric on the back of the hand
• Grip
• Silicone print

Mavic Ksyrium Elite Women's Glove Specification

• Back: PA 89%, EL 11%
• Back Insert: PES 100%
• Palm: PA 60%, PU 40%
• Ergo ride
• Ergo Strap
• Ergo Tab
• Ergo Cut
• Ergo Endurance Palm
• Fabrics Synthetic leather, Clarino(tm)

Genuine Zipp replacement part. Compatible with Zipp 77 or 177 disc hubs.

Designed for road cyclists and triathletes looking to minimize the trade off between aerodynamics, lightweight, and stability. The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.

Enve 4.5 SES Clincher Wheelset With Chris King Hub Specification

• Material: Carbon Fiber
• Rim Depth: 48 / 56
• Internal Rim Width: 18.5 / 17
• External Rim Width: 27 / 25.5
• ERD: 563 / 545
• Built Weight: 1511.00
• Rim Weight: 469 / 489
• Recommended Tire Size: 23mm - 25mm

Stiffest and most aero integrated handlebar and stem system. Mixing aerodynamics and ergonomics, the unique shape includes Vision’s Aero-Ergo central section. With a slight rise from the stem clamp and a 10 degree forward bend, the Vision Metron 5D Integrated Handlebar accommodates the natural position of your arms for more comfort and easier breathing, while the wing-like shape of the bar top aids aerodynamics.

Vision Metron 5D Integrated Handlebar with reinforced carbon fiber construction gives a great strength-to-weight ratio. The 5D features internal cable routing, with guides that accommodate wiring for electronic shifting.

Vision Metron 5D Integrated Handlebar Features

• Continuous carbon composite construction
• Aero-Ergo flat-top riser central section follows the natural arc of the arms with a 10-degree forward bend for more ergonomic climbing position and easier breathing
• Cable groove compatible with new Di2 systems w/ larger internal cable tunnel
• Reinforced and textured lever area
• Color: UD carbon finish
• Color graphic options: grey

Vision Metron 5D Integrated Handlebar Specification

• Sizes: L100 x W400, 420, 440mm(c-c)
• L110 x W400, 420, 440mm(c-c)
• L120 x W400, 420, 440mm(c-c)
• L130 x W400, 420, 440mm(c-c)
• Compact 125mm drop
• 80mm Reach
• 2 outward bend
• Weight: 395g (420mm)

This is the most aero road bike that Bianchi have created. Aero and comfort don’t normally go together but Bianchi have addressed this by using Countervail technology.

Bianchi Oltre XR4 Super Record EPS Custom Bike 2017 with its race geometry and Countervail technology is the ultimate superbike allowing the rider to go faster for longer. Slane Cycles mechanics customised an Oltre XR4 to be a world beater with only the best components such as Campagnolo Super Record EPS equipment providing a lightweight smooth, positive gear change every time.

Bianchi Oltre XR4 Super Record EPS Custom Bike 2017 is fitted with Mavic Cosmic SL C Carbon clincher wheels which are lightweight, stiff, aerodynamic and fast. The cockpit is 3T Ergonova Team Stealth Handlebars and 3T Team Stealth stem. Every fast bike requires quality brakes and thanks to Campagnolo Record direct mount brake calipers this bike has awesome stopping power.

Bianchi Oltre XR4 Super Record EPS Custom Bike 2017 Specification

• Frame Oltre XR.4 carbon w/Countervail, mechanical/electronic shifting compatible, headset 1.1/8>1.1/4", direct mount brakes, PressFit 86,5x41mm, sizes 47-50-53-55-57-59-61cm
• Fork Bianchi Full Carbon Aero, 1.1/8>1.1/4"
• Headset Fsa Orbit C-33 Matt UD Carbon 1.1/8">1.1/4"
• Shifters Campagnolo Super Record EPS Ergopower 11sp
• Rear derailleur Campagnolo Super Record EPS 11sp
• Front derailleur Campagnolo Super Record EPS
• Crankset Campagnolo Super Record Ultra-Torque CT TI Carbon
• BB Campagnolo Ultra Torque OS-Fit integrated cups 86,5x41mm
• Chain Campagnolo Record 11sp
• Sprocket Campagnolo Super Record 11sp
• Brakes Campagnolo Record, direct mount brake Brake levers included
• Wheels Mavic Cosmic SL C Carbon Clincher
• Tyre Mavic Griplink & Powerlink 700x25
• Stem 3T Team Stealth Stem
• Handlebar 3T Ergonova Team Stealth
• Seatpost Bianchi Oltre Full Carbon Aero, clamp with alloy head adjustable and reversible +/- 35mm, length: 250mm-47cm, 300mm-50/53cm, 350mm-55/59cm, 380mm-61cm, Setback (25mm/+10mm)
• Saddle Fi'zi:k Arione R3, w/WingFlex, rail carbon braided 7x9mm
• Waterbottle Bianchi Loli 600ml
• Water bottle hanger Elite Pase Carbon

PLEASE REFER TO SPECIFICATION LIST NOTE IMAGE IS FOR ILLUSTRATION PURPOSES

This is a lightweight, aerodynamic bike with ultra thin seat stays (UTSS Technology). The UTSS technology improved shock absorption, impact resistance and power transmission whilst reducing weight.

Bianchi Oltre XR1 Ultegra DI2 Bike 2017 is provides fast, smooth and precise gear changes every time thanks to it’s electronic shifting. This is a race bred bike that just wants to go fast.

Bianchi Oltre XR1 Ultegra DI2 Bike 2017 Specification

• Frame Oltre XR.1 carbon, mechanical/electronic shifting compatible, UTSS SS section, tapered HT, carbon dropout, BB-PressFit 86,5x41mm, sizes 47-50-53-55-57-59-61cm
• Fork Bianchi Full Carbon, 1.5">1.1/8"
• Headset Fsa Orbit C-40-ACB
• Shifters Shimano Ultegra Di2 ST-6870 2x11sp
• Rear derailleur Shimano Ultegra Di2 RD-6870 SS 11sp
• Front derailleur Shimano Ultegra Di2 FD-6870-F
• Crankset Shimano Ultegra FC-6800 Hollowtech II, 52x36T, Crank Length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-61cm
• BB Shimano SM-BB72-41B, PressFit
• Chain Shimano Ultegra CN-HG701-11
• Sprocket Shimano Ultegra CS-6800 11sp 11-28T
• Brakes Shimano Ultegra BR-6800, shoes R55C4 Brake levers included
• Wheels Fulcrum Racing Quattro C17
• Tyre Vittoria Rubino Pro G+ Isotech Graphene 700x25
• Stem Reparto Corse 3D Forged alloy 2014-T6, rise +/-6°, 1.1/8", Ext: 90mm-47/50cm, 100mm-53cm, 110mm-55/57cm, 120mm-59cm, 130mm-61cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, Size: 400mm-47/50cm , 420mm-53/57cm, 440mm-59/61cm
• Seatpost Oltre Full Carbon Aero; Alloy clamp type one bolts in colour black anodized; for alloy rail clamp, length: 250mm-47cm; 300mm-50/53cm, 350mm-55/59cm, 380-61cm, Setback 30mm
• Saddle Selle San Marco Concor Startup, manganese rails, 278x134mm
• Waterbottle Bianchi Loli 600ml
• Water bottle hanger Elite Paron Race composite

This bike can do everything thanks to it’s lightweight, stiff aero frameset which cuts through the wind while the UTSS technology absorbs shock providing a comfortable ride. Each pedal stroke provides an instantaneous power delivery providing a faster more efficient ride allowing the rider to go faster for longer.

Bianchi Oltre XR1 Ultegra Bike 2017 is a lightweight, aerodynamic bike with ultra thin seat stays (UTSS Technology). The UTSS technology improved shock absorption, impact resistance and power transmission whilst reducing weight.

Bianchi Oltre XR1 Ultegra Bike 2017 Specification

• Frame Oltre XR.1 carbon, mechanical/electronic shifting compatible, UTSS SS section, tapered HT, carbon dropout, BB-PressFit 86,5x41mm, sizes 47-50-53-55-57-59-61cm
• Fork Bianchi Full Carbon, 1.5">1.1/8"
• Headset Fsa Orbit C-40-ACB
• Shifters Shimano Ultegra ST-6800 2x11sp
• Rear derailleur Shimano Ultegra RD-6800 SS 11sp
• Front derailleur Shimano Ultegra FD-6800 Ultegra
• Crankset Shimano Ultegra FC-6800, Hollowtech II, 52x36T, Crank Length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-61cm BB Shimano SM-BB72-41B, PressFit
• Chain Shimano Ultegra CN-HG701-11
• Sprocket Shimano Ultegra CS-6800, 11sp, 11-12-13-14-15-17-19-21-23-25-28T
• Brakes Shimano Ultegra BR-6800, shoes R55C4 Brake levers included
• Wheels Fulcrum Racing 7 LG
• Tyre Vittoria Zaffiro Pro Slick 700x25
• Stem Reparto Corse 3D Forged alloy 2014-T6, rise +/-6°, 1.1/8", Ext: 90mm-47/50cm, 100mm-53cm, 110mm-55/57cm, 120mm-59cm, 130mm-61cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, Size: 400mm-47/50cm, 420mm-53/57cm, 440mm-59/61cm
• Seatpost Oltre Full Carbon Aero; Alloy clamp type one bolts in colour black anodized; for alloy rail clamp, length: 250mm-47cm; 300mm-50/53cm, 350mm-55/59cm, 380-61cm, Setback 30mm
• Saddle Selle San Marco Concor Startup, manganese rails, 278x134mm
• Waterbottle Bianchi Loli 600ml
• Water bottle hanger Elite Paron Race composite

This bike can do everything thanks to it’s lightweight, stiff aero frameset which cuts through the wind while the UTSS technology absorbs shock providing a comfortable ride. Each pedal stroke provides an instantaneous power delivery providing a faster more efficient ride allowing the rider to go faster for longer.

Bianchi Oltre XR1 Potenza Bike 2017 has all the advantages of the Oltre Xr2 at an unbelievable price, yet only weighs a mere 200g more than the XR2. The XR1 is a lightweight, aerodynamic frame with ultra thin seat stays (UTSS Technology). The UTSS technology improved shock absorption, impact resistance and power transmission whilst reducing weight.

Bianchi Oltre XR1 Potenza Bike 2017 Specification

• Fame Oltre XR.1 carbon, mechanical/electronic shifting compatible, UTSS SS section, tapered HT, carbon dropout, BB-PressFit 86,5x41mm, sizes 47-50-53-55-57-59-61cm
• Fork Bianchi Full Carbon, 1.5">1.1/8"
• Headset Fsa Orbit C-40-ACB
• Shifters Campagnolo Potenza black Power Shift 2x11sp Ergopower
• Rear derailleur Campagnolo Potenza short cage 11sp
• Front derailleur Campagnolo Potenza 11sp braze-on front der. w/35mm black clamp
• Crankset Campagnolo Potenza Power-Torque System CT 52/36, Crank Length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-61cm
• BB Campagnolo Power-Torque System OS-Fit integrated cups 86,5x41mm Chain Campagnolo 11sp
• Sprocket Campagnolo 11sp 11-29T
• Brakes Campagnolo Potenza, dual pivot Brake levers included
• Wheels Campagnolo Eurus
• Tire Vittoria Rubino Pro G+ Isotech graphene, 700x25
• Stem Reparto Corse 3D Forged alloy 7050, rise +/-7°, 1.1/8", 1 piece alloy faceplate, Ext: 70mm-47, 90mm-50cm, 100mm-53cm, 110mm-55cm, 120mm-57cm/59cm, 130mm-61cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, Size: 400mm-47/50cm, 420mm-53/57cm, 440mm-59/61cm
• Seatpost Oltre Full Carbon Aero; Alloy clamp type one bolts in colour black anodized; for alloy rail clamp, length: 250mm-47cm; 300mm-50/53cm, 350mm-55/59cm, 380-61cm, Setback 30mm
• Saddle Selle San Marco Concor Startup, manganese rails, 278x134mm
• Waterbottle Bianchi Loli 600ml
• Water bottle hanger Elite Paron Race composite

This bike can do everything thanks to it’s lightweight, stiff aero frameset which cuts through the wind while the UTSS technology absorbs shock providing a comfortable ride. Each pedal stroke provides an instantaneous power delivery providing a faster more efficient ride allowing the rider to go faster for longer.

Bianchi Oltre XR1 105 Bike 2017 Specification

• Frame Oltre XR.1 carbon, mechanical/electronic shifting compatible, UTSS SS section, tapered HT, carbon dropout, BB-PressFit 86,5x41mm, sizes 47-50-53-55-57-59-61cm
• Fork Bianchi Full Carbon, 1.5">1.1/8"
• Headset Fsa Orbit C-40-ACB
• Shifters Shimano 105 ST-5800, 2x11sp
• Rear derailleur Shimano 105 RD-5800-L SS 11sp
• Front derailleur Shimano 105 FD-5800-L
• Crankset Shimano 105 FC-5800-L, Hollowtech II, 52-36T w/o BB parts, black, crank length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-61cm BB Shimano SM-BB72-41B
• Chain Shimano CN-HG601-11, 11sp
• Sprocket Shimano 105 CS-5800 11sp, 11-28T, 11-12-13-14-15-17-19-21-23-25-28T
• Brakes Shimano 105 BR-5800 Brake levers included
• Wheels Fulcrum Racing Sport
• Tyre Vittoria Zaffiro Pro Slick 700x25
• Stem Reparto Corse, 3D Forged alloy 2014-T6, rise +/-6°, height 38mm, 1.1/8", sandblast matt finish, Ext: 90mm-47/50cm, 100mm-53cm, 110mm-55/57cm, 120mm-59cm, 130mm-61cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, sandblast matt black finish, size: 400mm-47/50cm, 420mm-53/57cm, 440mm-59/61cm
• Seatpost Oltre Full Carbon Aero; Alloy clamp type one bolts in colour black anodized; for alloy rail clamp, length: 250mm-47cm; 300mm-50/53cm, 350mm-55/59cm, 380-61cm, Setback 30mm
• Saddle Selle San Marco Squadra startup, carbon steel rail, 277x134mm
• Waterbottle Bianchi Loli 600ml
• Water bottle hanger Elite Paron Race composite

The Dogma name represents domination and when you think it cannot get any better Fausto Pinarello creates a new benchmark for racing bikes. Many features borrowed from the BOLIDE, currently the fastest bike in the world, such as concaved down tube , flap behind fork to create a stiffer, more aero and lighter bike.

Pinarello Dogma F10 Dura-Ace R9100 Bike is equipped with new Shimano Dura-Ace R9100 components to create a super light bike that provides super smooth, precise gear changes. This lighter bike with Fulcrum Racing Zero wheels and wider gearing range allows the rider to climb for longer and faster whilst the R9100 brake callipers provide awesome stopping power for those tricky descents.

Pinarello Dogma F10 Dura-Ace R9100 Bike gains a 12.6% aerodynamic performance in the area between the down tube and water bottles while further increasing the lateral stiffness. Pinarello made this lighter more aerodynamic and increased the stiffness by 7.1% over the F8 thanks to cutting edge materials and expertise.

Pinarello Dogma F10 Dura-Ace R9100 Bike Specification

• Frame Pinarello Dogma F10
• Fork Onda F10 with Fork Flap
• Headset Pinarello
• Crankset Dura-Ace R9100
• Brake Callipers Dura-Ace R9100
• Brake/Shift Levers Dura-Ace R9100
• Rear Derailleur Dura-Ace R9100
• Front Derailleur Dura-Ace R9100
• Cassette Dura-Ace 11/30T
• Chain Dura-Ace 11 Speed
• Wheels Fulcrum Racing Zero
• Handlebar Most 3K
• Stem Most Tiger Lite 3K
• Seatpost Pinarello Dogma F10
• Saddle Fizik Arione
• Tyres Vittoria Corsa 700x25mm

Disc version of the most comfortable carbon frameset available. Designed to accommodate disc brakes for riders who prefer better stopping power on all terrains in every condition.

Bianchi Infinito CV Disc Frameset 2017

• Product code XMB24IBZ
• Colour BZ
• Frame Infinito CV Carbon w/Countervail, Disc Brake, Mechanical/Electronic Di2/EPS compatible
• Fork Bianchi Full Carbon w/Countervail, 1.1/8">1,5" Disc Brake, dropout 12x100mm w/thru axle
• Headset Fsa Orbit C-40-ACB
• 28" tyre compatible
• BBset "PF30"
• Rear thru axle 12x135mm
• Available sizes 50-53-55-57-59-61-63cm

This headset cap is for use with Vision Metron 5D Integrated Handlebar on Bianchi Oltre XR4 frameset.

This battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.

Sram eTap Battery For Front Or Rear Derailleur Features

• Up to 1000 kilometres of riding per charge
• Fits front or rear SRAM eTap derailleur
• Finish Black
• Weight: 24g

The Scratch is a unisex round saddle ideal for long distance road and XC riding. CPC surface features 3D polymer chains arranged for maximum benefit. This includes optimum grip, shock absorption, and air cooling. Furthermore, it enhances blood flow through massaging action, reducing numbness and tendon related discomfort. In turn this reduces fatigue.

Prologo Scratch 2 CPC Tirox Saddle Ergo Shape Design ESD features a slender front area and a short rear area that quickly reaches maximum width. This permits a round pedal stroke, allowing the rider to maintain a natural position. The legs of the cyclist have more space during all phases of the pedal stroke, reducing friction and increasing alignment and performance. Finally, the opening swift of the rear part of the saddle helps the rider to find the correct support and support of the ischial bones. This prevents sliding forward and any rotation of the pelvis.

Prologo Scratch 2 CPC Tirox Saddle Specifications

• Size (mm): 280 * 134 – 280 * 143
• Weight (gr): 237 - 237
• Base: Carbon Injection Monocoque
• Rails: TiroX
• Cover: Microfiber + CPC
• Padding: Light Foam

These socks will keep you toasty warm when the temperature dips towards zero. They’re a good alternative to Merino as they’re unbulky, so they don’t soften your power transfer and they fit your shoes without cramping your toes.

Mavic Ksyrium Elite Thermal Socks are reinforced from heel to toe with terry-knit, with double-layer knot on your ankle. They also contain soft Meryl Skinlife fibres that maintain the natural balance of your skin and have odor control and antimicrobial properties.

Mavic Ksyrium Elite Thermal Socks Features

• Anatomical fit, specific left and right
• Meryl® Skinlife
• Flatlock seams on toes
• Label Cold Ride

Ergo Endurance Palm, 3 zones of Gel and EVA foams developed for long distance rides Ergo Cut, a pre-shaped patterning, increases flexible fit and allows maximum range of movement.Ergo Strap, an ergonomic, adjustable palm, hand hook and loop closure.

Mavic Ksyrium Elite Gloves use specific mix of materials on the back of the hand for extra comfort, with stretch mesh for cooling, Lycra® area for sun protection and a soft nose wipe. Silicone printing assures maximum grip Soft and thin breathable Clarino(tm) provides wind, water and stain repellent and offers good grip and abrasion resistance.

Mavic Ksyrium Elite Gloves Faetures

• Ergo ride
• Ergo Endurance Palm
• Ergo Cut
• Ergo Tab
• Ergo Strap
• Fabrics Clarino(tm) Synthetic leather

This pro fit glove weighs less than 50 grams. No palm pads for maximum bike sensation and bar feel. Very thin glove construction with 3 different fabrics for better performance: stretch sublimated lycra and soft nose wipe on the back, and durable synthetic fabric on the palm.

Mavic Cosmic Glove Specifications

Composition

• Back Insert PES 65%, CO35%
• Palm PU 100%

Ergo ride

• Ergo Tab

Fabrics

• Sleek Wick ST
• Nose Wipe

SM-JC41 E-tube cable junction for internal wire routing

Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box

To be positioned neatly inside frame tubing when connected

Cables sold separately

Reliable and secure water resistant connectors

Material: Easy-to-squeeze BPA free, recycleable LDPE

Cap: Polyproplylene PP, wide-mouth screw-type

Valve: Soft Thermoplastic rubber

Available Colours: Black, Celeste

Diameter: 74mm

Capacity: 600ml

Genuine Zipp replacement part specifically for Zipp 177 rear hubs.

Genuine Zipp replacement part available in Shimano / SRAM or Campagnolo® versions specifically for Zipp 177 rear hubs.

To celebrate Ernesto Colnago’s eighty-fifth birthday comes this limited edition masterpiece bike, called Ottanta5 a custom-made jewel built around the C60, a unique and inimitable bike frame, handmade one by one. Even the paint is done by hand, airbrushed in a gloss-silver colour with arabesque decorations.

The logo on the head tube and seat tube is the first Colnago logo created in 1954.

Colnago Ottanta5 Limited Edition Bike will be available in a limited edition of only 85 pieces worldwide. The Ottanta5 is constructed of the highest quality carbon fibre, with star-shaped tubes and lugs a proven design element tested over the years, beginning with the Master. The C60 has bigger tubes with thinner walls, and the same thing can be said about the lugs, they are larger and stiffer, designed with the same shape present on the tubes.

Colnago Ottanta5 Limited Edition Bike is equipped with only the very best full Super Record EPS groupset with Bora Ultra 50 wheels and Colnago signature Ottanta5 handlebars and stem. The normal Colnago Logos are replaced and each bike will have Ernesto’s signature with Ottanta5 lettering.

Colnago Ottanta5 Limited Edition Bike Specification

• Frame Colnago C60 Ottanta5 Limited Edition
• Fork Colnago C60 Ottanta5 Carbon Fibre Fork
• Headset Colnago
• Stem Colnago Ottanta5 Limited Edition
• Handlebars Colnago Ottanta5 Limited Edition
• Tape Colnago
• Brake Calipers Campagnolo Super Record EPS
• Shifters Campagnolo Super Record 11 Speed EPS
• Front Derailleur Campagnolo Super Record EPS braze-on
• Rear Derailleur Campagnolo Super Record 11 Speed EPS
• Cassette Campagnolo Super Record 11 Speed
• Chain Campagnolo Record
• Crankset Campagnolo Super Record Ultra Torque Ti Carbon
• Wheelset Campagnolo Bora Ultra 50 Clincher
• Tyres Vittoria Corsa G+ Isotech tyre 25mm 700c, clincher
• Saddle Selle Italia Colnago Limited Edition SLR Carbon Rail
• Seatpost Colnago Limited Edition

This is the perfect gift for the Bianchi fan. This quality mug as used in official Bianchi Cafe & Cycles stores worldwide. Mug with handle is beautifully designed with Celeste on the outside with black lettering whilst the interior is finished in white. Supplied in a beautiful presentation box with window.

Bianchi Cafe & Cycles Mug Features

• Quality mug with Bianchi Café & Cycles logo
• Supplied in presentation box
• Size 8cm x 9.5cm
• Not dishwasher safe

These shoes were made to handle long road races without discomfort and still give you plenty of power when you put the hammer down in the last few kilometres. The Mavic Ergo Dial QR gives you a micro-adjustable fit at the top of the foot, and the two Ergo straps make sure its just as precise and comfortable all the way down.

Mavic Cosmic Elite Shoes with their signature Endofit(tm) tongue hugs your feet in all the right places providing the ‘glove effect’. The sole is built with Mavic’s Energy Carbon Composite, making sure your power goes into the pedals exactly when you need it. Drive your power into the pedals with the stiffness of the Energy Carbon Comp Outsole Index Energy Transfer: 60

Mavic Cosmic Elite Shoes Features

• Energy Carbon Comp Outsole
• Mavic Ergo Dial QR
• Ergo Strap
• Endofit(tm) Tongue
• Ergo Fit 3D
• OrthoLite®

This helmet is super light weighing just 230g in a medium, but it’s also highly technical. Strategic yellow colour and 360° reflective highlights for nighttime visibility. Reflective straps and reflective dots on the helmet to be visible in low-light conditions and when in the riding position.

Mavic Cosmic Pro Vision Helmet 2017 features Live Fit SL technology. Live Fit SL’s flexible XRD® foam construction moulds to your head shape for a perfect personal fit, secure position and no hotspots, all day long.

Mavic Cosmic Pro Vision Helmet 2017 is bolstered by Mavic’s Ergo Hold SL retention system, which allows you to tweak it with just one hand, perfect for mid-ride adjustments. It keeps you cool, too thanks to Mavic’s signature 37.5® fabric on the padding, which uses active particles to attract humidity vapour and wick away sweat five times faster than standard fabrics.

Mavic Cosmic Pro Helmet Vision 2017 Features

• Lightweight just 230 grams (in a size M)
• Ergo Hold SL Retention System
• Live Fit SL
• Clima Ride 37.5
• 360° Reflective highlights
• 3 position adjustment system
• Label 37.5®, XRD®
• CE certified

This helmet is super light weighing just 230g in a medium, but it’s also highly technical. Beneath those speed lines everything is designed to keep your ride as fast, light and comfortable as possible. The newest feature is Live Fit SL technology. Live Fit SL’s flexible XRD® foam construction moulds to your head shape for a perfect personal fit, secure position and no hotspots, all day long.

Mavic Cosmic Pro Helmet 2017 is bolstered by Mavic’s Ergo Hold SL retention system, which allows you to tweak it with just one hand, perfect for mid-ride adjustments. It keeps you cool, too thanks to Mavic’s signature 37.5® fabric on the padding, which uses active particles to attract humidity vapour and wick away sweat five times faster than standard fabrics.

Mavic Cosmic Pro Helmet 2017 Features

• Lightweight just 230 grams (in a size M)
• Ergo Hold SL Retention System
• Live Fit SL
• Clima Ride 37.5
• Reflective highlights
• 3 position adjustment system
• Label 37.5®, XRD®
• CE certified

This is a great road helmet that’s light, comfy and tough enough to form part of your kit for years. It’s super comfy thanks to the Aksium Fit pad and Ergo Hold retention system. You can adjust the height of the straps and the hold on your head with just one hand so it’s simple to tweak on the move.

Mavic Aksium Helmet 2017 also comes with a removable visor for sunny days, so this helmet really will give most riders everything they need in one great value package. With 23 vents it’s lightweight and airy too.

Mavic Aksium Helmet 2017 Features

• 23 vents
• Ergo Hold Retention System
• Reflective highlights
• Removable visor
• 3 position adjustment system

Constructed using innovative Countervail® a cutting edge material used in the aerospace industry but exclusive in the world of cycling to Bianchi. This bike delivers high rigidity with a great fluency whilst reducing physical fatigue to the rider. Countervail system developed by Bianchi and proven in the extreme conditions of NASA aerospace operations.

Bianchi Infinito CV Potenza Bike 2017 is suitable for riders demanding a high performance bike over all types of road under all conditions. This bike represents superb value for money with the new beautiful Campagnolo Potenza11 speed groupset and the reliable Fulcrum Racing 5 LG clincher wheels. This bike is available at Slane cycles in 8 sizes beginning with 47, 50, 53, 55, 57, 59, 61 and 63. If you want the most comfortable machine then this is your bike.

Bianchi Infinito CV Potenza Bike 2017 Specification

• Frame Infinito CV Carbon w/Countervail, Mechanical/Electronic Di2/EPS shifting compatible, 28" tyre compatible, BBset PF30, sizes 47-50-53-55-57-59-61-63
• Fork Bianchi Full Carbon w/Countervail, 1,5" head
• Headset Fsa Orbit C-40-ACB
• Shifters Campagnolo Potenza Power Shift 11sp Ergopower, black
• Rear derailleur Campagnolo Potenza short cage 11sp
• Front derailleur Campagnolo Potenza black 11sp
• Crankset Campagnolo Potenza Power-Torque System 50/34T, Crank Length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-60/63cm
• BB Campagnolo Power-Torque System OS-Fit integrated cups BB30 68x46mm Chain Campagnolo 11sp
• Sprocket Campagnolo 11sp 11-29T
• Brakes Campagnolo Potenza dual pivot Brake levers included
• Wheels Fulcrum Racing 5 LG
• Tyre Vittoria Rubino Pro G+ Isotech graphene, 700x25
• Stem Reparto Corse 3D Forged alloy 7050, rise +/-7°, 1.1/8", 1 piece alloy faceplate, Ext: 70mm-47, 90mm-50cm, 100mm-53cm, 110mm-55cm, 120mm-57/59cm, 130mm-61/63cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, Size: 400mm-47/50cm , 420mm-53/57cm, 440mm-59/63cm
• Seatpost Reparto Corse full carbon UD w/Alloy clamp, two stainless steel bolt, setback 15mm, diam. 31.6mm, Length 350mm
• Saddle Fi'zi:k Aliante R7, Manganese rail

This is a genuine Colnago replacement hanger.

Constructed using innovative Countervail® a cutting edge material used in the aerospace industry but exclusive in the world of cycling to Bianchi. This bike delivers high rigidity with a great fluency whilst reducing physical fatigue to the rider.

Bianchi Infinito CV Ultegra DI2 Bike 2017 is for riders demanding a high performance bike over all types of road under all conditions. This bike represents top quality, with the effortless gear changes from Shimano Ultegra DI2 11 speed groupset and the smooth Fulcrum Racing Quattro clincher wheels.This bike is available in 8 sizes beginning with 47, 50, 53, 55, 57, 59, 61, 63. If you want the most comfortable machine then this is your bike.

Bianchi Infinito CV Ultegra DI2 Bike 2017 Features

• Frame Infinito CV Carbon w/Countervail, Mechanical/Electronic Di2/EPS shifting compatible, 28" tire compatible, BBset PF30, sizes 47-50-53-55-57-59-61-63cm
• Fork Bianchi Full Carbon w/Countervail, 1,5" head
• Headset Fsa Orbit C-40-ACB
• Shifters Shimano Ultegra Di2 ST-6870 2x11sp
• Rear derailleur Shimano Ultegra Di2 RD-6870 SS 11sp
• Front derailleur Shimano Ultegra Di2 FD-6870-F
• Crankset Shimano Ultegra FC-6800 Hollowtech II, 50x34T w/BB(BSA), Crank Length: 170mm-47/53cm, 172.5mm-55/59cm, 175mm-60/63cm BB included in the crankset
• Chain Shimano Ultegra CN-HG701-11
• Sprocket Shimano Ultegra CS-6800 11sp, 11-12-13-14-15-17-19-21-23-25-28T
• Brakes Shimano Ultegra BR-6800, shoes R55C4
• Wheels Fulcrum Racing Quattro C17
• Tyre Vittoria Rubino Pro Speed G+ Isotech Graphene 700x25
• Stem Reparto Corse 3D Forged alloy 7050, rise +/-7°, 1.1/8", 1 piece alloy faceplate, Ext: 70mm-47, 90mm-50cm, 100mm-53cm, 110mm-55cm, 120mm-57cm/59cm, 130mm-61/63cm
• Handlebar Reparto Corse Compact Flat Top, alloy 2014 diam. 31,8mm, reach 126mm, drop 77,4mm, Size: 400mm-47/50cm , 420mm-53/57cm, 440mm-59/63cm
• Seatpost Reparto Corse full carbon UD w/Alloy clamp, two stainless steel bolt, setback 15mm, diam. 31.6mm, Length 350mm, Di2 battery compatible
• Saddle Fi'zi:k Aliante R5, K:ium rail

Road pedal for entry level use at a value for money price. Wide lightweight resin body provides large shoe contact area to maximise power transfer and support whilst reducing weight. Low maintenance sealed cartridge axle unit.

The low profile platform with open design allows for easy access and cleat adjustments.

Shimano PD-R550 SPD SL Road Pedals Features

• Lightweight composite body
• Extra-large cleat target for easier engagement
• Extra-wide platform for maximum efficient transfer of power
• Durable stainless steel body plate reduces flex and pedal body wear
• Wide bearing placement for stable, uniform load distribution
• Weight: 310g pair

This reliable saddle is ideal for those long days on the road. Designed for road riding, with an emphasis on seated performance, suitable for long distance road riding, or for riders that favour an upright position.

Prologo Scratch 2 Pas Tirox Saddle Specifications

• Available Sizes (mm): 280 x 134 or 280 x 143
• Weight (gr): 215 - 217
• Base: Carbon Injection Monocoque
• Rails: Tirox
• Cover: Microfiber
• Padding: Light Foam

Genuine Replacement bearing kit with sealing rings for the Campagnolo Power Torque crankset.

Direct mount brakes offers a clean look in high-performance package. The cam style quick release and Inplace pad holders make setup and maintenance easier than ever. Riders looking for a brake that combines elegance with performance, the search ends with the T930.

TRP T930 Direct Mount Brake Calipers Pair Features

• Inplace Road CNC adjustable angle cartridge pad holders
• TRP carbon and aluminium compound pads included
• CNC alloy machined arms
• Cam style quick release

TRP T930 Direct Mount Brake Calipers Pair Specification

• Colour: Grey
• Reach: 23.5-35mm
• Weight: 184 grams per caliper
• Maximum rim width: 28mm

Security at your fingertips with a fresh look to compliment SRAM RED eTap componentry. SRAM RED brakes won’t slow you down. Until you’re ready. That’s why the SRAM RED brakeset has been created with a host of wind-cheating features to make the brake body more aerodynamic, helping you keep your speed until the moment you’‘re ready.

Sram Red Aero Brake Calipers with patented AeroLink(tm) arm reduces frontal area while improving braking performance and modulation. The brake body, with updated graphics, has been sculpted to provide a sleek aerodynamic profile to the wind. Even the smallest details, like the barrel adjuster, point away from the wind. And to finish off the package, SwissStop Flash Pro pads come standard with the brake. It’s a better brake in every way.

Sram Red Aero Brake Calipers

• AeroLink(tm) arm amplifies braking power while reducing frontal area
• Compatible with SRAM RED eTap components
• Lighter, aero pad retainers carry SwissStop Flash Pro pads standard
• Aero design extends to the shape of the indexed four-position quick release
• Wider clearance for modern wheelsets

These extensions provides easy hand clearance for more-relaxed aerobar setup. Especially suitable for wide-aero setup, this extension shape is supplied as a standard with the super-adjustable Vola aerobar that won ‘Best of Show’ at Eurobike 2013. Team version is in carbon-fiber.

3T Team Wrist Comfort Bend Carbon Extensions Specification

• Clamp: 22.2 mm ∅
• Material: Carbon-fiber
• Finish: UD Gloss Black